Edwards gauge controller manual






















Connect to an Edwards Controller The APG is compatible with the TIC and ADC digital controllers and the AGD analogue display from Edwards. The controllers will automatically recognise the gauge and display the measured pressure. To connect to a Edwards controller use a cable which is terminated in suitable connectors. These cables are available. Instruction Manual Instrument Controller Edwards, Innovation Drive, Burgess Hill, West Sussex, RH15 9TW, UK. declare under our sole responsibility, as manufacturer and person within the EU authorised to assemble the technical file, that the product(s) TIC Instrument Controller D TIC Instrument Controller 6-Gauge D The Edwards Active Gauge Controller (AGC) is used with the Edwards Active vacuum gauges. The AGC interfaces directly to 3 or 6 (depending on the AGC model) Active vacuum gauges providing a comprehensive control and display system. You can use any of the following gauges with the AGC D Active Pirani APG-M, APG-L.


To aid system integration the enhanced controller is provided with an RS interface. When combined with suitable gauges such as the Edwards APG Pirani, AIM Inverted Magnetron or Wide Range Gauge (WRG), the ADC represents a cost effective means of monitoring and controlling process vacuum in a broad range of applications. control be needed 8 Set point relay For the first time on an Edwards gauge we have dedicated set point relays available, enabling you to trigger a wide range of knock on actions. PRODUCT DATA SHEET TECHNICAL SPECIFICATIONS APG M series APG LC series APG MP series. The TAG controller will also run a backing pump, air vent valve, an air cooler and an Edwards active gauge, making the TAG a versatile system controller. This compact 24 V controller is ideal for use on bench tops or suitable mobile platforms where space is limited, yet functionality and reliability are essential.


We, Edwards Limited, Crawley Business Quarter, Manor Royal, Crawley, West Sussex, RH10 9LW, UK declare under our sole responsibility, as manufacturer and person within the EU authorised to assemble the technical file, that the product(s) TIC Instrument Controller TIC Instrument Controller 6-Gauge D D D Remove all of the packaging material and check the ADC. If the Controller is damaged, follow the Edwards return of equipment procedures that are laid out in the back of this manual. Do not use the Controller if it is damaged.). This manual provides installation, operation and maintenance instructions for the Edwards Active Gauge Controller. Read this manual before you install and operate the controller. Important information is highlighted as WARNING and CAUTION instructions; you must obey these instructions. The use of WARNINGS and CAUTIONS is defined below. WARNING.

0コメント